A standard support system allows the combination with any functional maintenance cable/conductor that has a valid German classification report (abP) regulating the installation on standard support constructions.
In addition, cable bundles or deviating fastening spacings can also be installed in accordance with the cable manufacturer's German classification report (abP).
Yoke clamps
2401/284/20 - CM
C-profile rails
SAS spacing cleats
Conduit spacing cleats
The SAS and 85 spacing cleats and the B and BU yoke clamps with or without long counter through LW, galvanized or stainless steel, meet the criteria as a standard support structure in accordance with DIN 4102 Part 12 for fire resistance classifications E30 to E90 and can be used for horizontal cable laying on walls and ceilings as well as vertically.
For horizontal wall installation with yoke clamps and C-profile rails, suitable measures must be taken to prevent slipping.
For SAS and 85 spacing cleats and B and BU yoke clamps, the fastening spacing a is ≤ 300 mm, for B or BU yoke clamps with long counter through LW... the fastening spacing a is ≤ 600 mm.
For fastening in the ground, use M6 fastening elements for SAS and 85 spacing cleats and ≥ M6 fastening elements for C-profile rails of the yoke clamp. The fastening spacing DA (dowel spacing) along a C-profile rail is ≤ 250 mm.
Further cable-specific installation options with the SAS, 85, B and BU clamps, such as cable bundling or higher fastening spacings, can be found in the German classification reports (abP) of the cable manufacturers.
