Cable Bundler SHS
The MLAR - installation system SHS cable bundler is characterised by practice-oriented fastening spacings a ≤ 0.6/0.8 m and loads q ≤ 2.2/4.5/15 kg/m.
The large opening allows easy insertion of cables without threading. Once the cable has been fully inserted, simply close the cap. Rewiring is possible at any time. They can be used above suspended EI 30 (F 30) to EI 90 (F 90) intermediate ceilings in accordance with the MLAR.
For fastening spacings and loads, please refer to the fire protection assessments.
Depending on the amount of cable to be routed, the SHS 15 and SHS 30 collective holders can be used for a fastening spacing of a ≤ 600 mm and a cable weight of q ≤ 2.2 or 4.5 kg/m, or the SHS 80 collective holder for a fastening spacing of a ≤ 800mm and a cable weight of q ≤ 15 kg/m.
The SHS collective holders have keyholes for fastening to the wall or ceiling, which eliminates the need to remove the pre-assembled nut and washer from the fastener.
The mounting of the collective holders is done with suitable and tested fasteners ≥ M6.
