The installation system for cable protection duct LLK for circuit integrity maintenance in E30 and E90 in accordance with DIN 4102-12 is a rational way of discreetly embedding what is required by building regulations in the interior design environment.
With this cable routing system for horizontal cable laying on walls and ceilings in accordance with DIN 4102 Part 12 for circuit integrity maintenance classes E30 to E90, cable protection ducts are available in 2 sizes.
Depending on the amount of cable to be laid, the cable protection duct LLK 26.030 can be used with a fastening spacing of a ≤ 500 mm and a cable dead weight of q ≤ 0.3 kg/m or the cable protection duct LLK 60.100 with a fastening spacing of a ≤ 500 mm and a cable dead weight of q ≤ 0.3 kg/m.
For cable retention in the cable protection duct LLK 60.100, cable support clamp LHS 60.100 are available, which are mounted offset from each other at a distance of 500 mm.
The continuous electrical conductivity can be ensured with the system-related accessories LST 26.030 or LST 60.100. The cable protection ducts are fastened with suitable and tested fasteners.
